|
|
|
|
| AD-5551
|
ULTRA
HOME SECURITY SYSTEM with LCD and Keypad (8 Zone) |
- Monitors
between one and eight entry/exit points (zones) of a building
or room
- Unique
40 years EEPROM memory circuitry for a complete peace of mind
- Allows
monitoring to be totally or partially suspended when required
by the legitimate guardians (users) of the premises
- Indicates
audibly (e.g. bell) and/or visibly (e.g. strobe/flasher) when
one or more zones have been entered without authority
- Turns
off activated bell after a preset period to prevent annoyance
to neighbors
- Allows
timed zone entry/exit (time-out) for users without triggering
the full alarm
- Allows
full monitoring of required zones once time-out has ended
- Allows
users to terminate time-out procedure
- Allows
users to control the monitoring system by means of a unique
alphanumeric personal identity code (PIN) entered via a keypad
- Allows
users to change the PIN code
- Normally
powered from a mains power source
- Instantaneously
switches over to being powered by a heavy duty back-up battery
if mains power fails
- Keeps
the battery fully charged when mains power is present (the
battery should be capable of keeping the monitoring system and
any activated alarms operational for a reasonable period)
- Allows
the system to resume active monitoring should power totally
fail but subsequently resume
- Indicates
that there has been a total power failure even after power has
been resumed
- Prevents
the bell from being activated when power is resumed
- Indicates
for later viewing whether zones have been entered, even though
there may also have been a power failure and resumption
- Allows
monitoring of fewer zones than are available
- Automatically
recognizes whether a sensor should be monitored for an open
circuit or a closed circuit
- Allows
open circuit or closed circuit sensors to be used without
system modification
- Recognizes
that a sensor is incorrectly open or closed prior to
monitoring being activated and indicates which sensor is
incorrect (i.e. door open when it should be closed)
- Allows
users to preview zone sensor status
- Allows
the bell-on time to be set for a shorter period than the 40
minutes
- Allows
users to check the system by means of indicator lights without
activating the bell (etc.)
- Allows
indicator lights to display the status of the power supply and
bell (etc.)
- Provides
anti-tamper warning of interference with the system
- Provides
a "Panic" button that immediately activates the bell
(etc.) even if the system is not set for full zone monitoring
- Provides
"passive" advice (e.g. buzzer) that a zone has been
entered even if the system is not set for full monitoring, and
for the advice to be terminated once the zone has been vacated
(e.g. to monitor shop-door opening/closing)
- Accepts
all conventional types of switched-output commercial sensor,
including magnetic catches, pressure pads, passive infrared (PIR)
devices, vibration detectors, etc., and for any mixture of
these to be used
- Inherently
stable and most unlikely to be triggered except via the
installed sensors
User
friendly 2 Line LCD display for user to set the system |
|
|
|
|
|
Destinyzone
Security Systems |
|
